Updating Firmware on Navigator
Power on the headset and ensure you are connected to Wi-Fi. For instructions on how to connect to WiFi, please see here: Connecting the Navigator to WiFi
Charge the headset to at least 30%. Leave the headset plugged into power during the update process, as if the headset drops below 30% at any time, the update will stop.
Say “My Programs", then "Wireless Update.”
Wait a few seconds for the device to fetch the update.
Say “Download” to start downloading.
Once it shows 100%, say, “Install Now", then "Okay.”
Once the device powers back on repeat step #3 until there is no longer a download button. The download button will be replaced by a Check for Updates button.
![Updating Firmware on HMT-1 Screenshot](https://storage.crisp.chat/users/helpdesk/website/8f7a0d00a9b20800/update-firmware_1cu0513.jpeg)
Charge the headset to at least 30%. Leave the headset plugged into power during the update process, as if the headset drops below 30% at any time, the update will stop.
Say “My Programs", then "Wireless Update.”
Wait a few seconds for the device to fetch the update.
Say “Download” to start downloading.
Once it shows 100%, say, “Install Now", then "Okay.”
Once the device powers back on repeat step #3 until there is no longer a download button. The download button will be replaced by a Check for Updates button.
![Updating Firmware on HMT-1 Screenshot](https://storage.crisp.chat/users/helpdesk/website/8f7a0d00a9b20800/update-firmware_1cu0513.jpeg)
Updated on: 17/02/2023