Updating the Firmware on your SPX device
Power on the headset and ensure you are connected to Wi-Fi.
Charge the headset to at least 30%. Leave the headset plugged into power during the update process, as if the headset drops below 30% at any time, the update will stop.
Say “More Apps", then "Wireless Update.”
Wait a few seconds for the device to fetch the update.
Say “Download” to start downloading.
Once it shows 100%, say, “Install Now", then "Okay.”
The device will now restart.
Once the device powers back on repeat step #3 until there is no longer a download button. The download button will be replaced by a Check for Updates button (as shown below).
Charge the headset to at least 30%. Leave the headset plugged into power during the update process, as if the headset drops below 30% at any time, the update will stop.
Say “More Apps", then "Wireless Update.”
Wait a few seconds for the device to fetch the update.
Say “Download” to start downloading.
Once it shows 100%, say, “Install Now", then "Okay.”
The device will now restart.
Once the device powers back on repeat step #3 until there is no longer a download button. The download button will be replaced by a Check for Updates button (as shown below).
Updated on: 17/02/2023